Steel Stud and Track Framing System provide premium performance
The Studco steel stud framing system is engineered to provide designers and installers the solution to create framing systems that are not only durable and versatile but can also achieve the needs and design criteria in accordance with the BCA and appropriate Australian standards.
Our steel stud and wall framing systems have enhanced strength making them tougher, safer and more reliable for load bearing capacities.
Nogging Brackets
Pre-punched and Pre-cut noggin brackets to suit a wide range of timber noggin sizes.
Heda tough wall system
High performance jamb and lintel system. Three profiles now available.
Boxed Studs
All gauges of Studco studs can be boxed to provide extra strength at door openings or where greater loads are required.
PVC Tear-Away
A unique feature available on a range of PVC sections, providing a guide for your joint knife as well as a protective masking for compound and painting. Simply tear off the leg for a clean finish.
SA77 Spray Adhesive
A fast tack adhesive that bonds PVC mouldings and trims to plasterboard. Compound can be applied approx. 30 mins after PVC is positioned.
UV stabilised PVC
Studco’s range of PVC mouldings
and trims manufactured from UV stabilised PVC.
PVC mouldings to suit any exterior or interior building application
- Available in a huge range of different shapes and sizes, PVC Mouldings are a far cry in quality from the wood and metal trims and mouldings of days gone by. PVC Mouldings are as easy to cut as wood is, and it minimises sanding and grinding.
- The most significant characteristic of PVC Mouldings and Trims is the flexibility. This creates the ability to adjust the mouldings to different angles and curves in structures.
- Ensure the small imperfections of your interior or exterior structure are hidden with PVC Mouldings and trims from Studco Systems.
Building System – EZY Finishing Sections
The Studco EZY finishing sections EZYCap, EZYReveal, Cavkit, FastCap and EZYPelmet are designed to provide a quick and economical method for the finishing and capping of plasterboard.
Manufactured from cold rolled form steel providing a strong and secure section, that is durable and fast to install.
EZYCap
The strong and versatile alternative for stop ends.
EZYReveal
Quick and economical finishing of reveals.
FastCap
Custom finishing sections.
Slimceil Ceiling
Slimceil Ceiling System
The engineered low clearance ceiling system.
M238 Swivel Locking Key
Multi-directional locking clip that is useful in difficult grid setout situations.
M534 Spring Hanger
With fixing holes for preliminary suspension of bulkhead and floating ceilings.
Our Suspended Ceiling Systems provide a flush finish to your plasterboard ceiling
- Components are manufactured from galvanised steel, designed for safe handling, and easily clipped together to form gridwork where building boards can be simply fixed.
- Components such as battens, furring channels and top cross rail allows for a range of loading options and ceiling spans.
- Studco Concealed Ceiling Systems can be used for non-fire-rated or fire-rated applications and have been designed to meet the relevant Australian standards.
Concealed Hinges and Cavity Sliders are just the beginning for EZYJamb
EZYJamb steel door frames are Manufactured by Studco Building Systems who specialises in the manufacture of quality rollformed steel building products. EZYJamb is committed to fulfilling the most challenging customer requirements and is constantly seeking to introduce and implement new viable systems for the construction industry worldwide. Studco is a quality accredited company to ISO 9001 and is dedicated to offering quality products with personalized efficient customer service.
EZYJamb is a split type jamb manufactured form cold rolled steel with a patented profile to produce a strong and secure assembly. The unique design of EZYJamb combines visual appeal, strength and versatility.
EZYJamb (split type)

EZYJAMB for Hinged doors
Rocyork hinge

Rocyork hinge
EZYJAMB CAVKIT

EZYJAMB CAVKIT for Cavity Sliders
Black Backing Strips
Versatile black backing strips for express joint applications.
Heavy Gauge Top Hats
Available in a range of sizes for fixing cladding to interior and exterior building structures.
Slotted Angle for Hebel
Suitable for autoclad created concrete panel systems.
Top Hat Sections & Cladding Sections
Studco Top Hats Sections are used for fixing support for lining material where the structural framework is not suitable for fixing directly to. A range of Studco Junction Studs, Battens and Top Hats in various sizes and thicknesses are available to suit any cladding requirements for interior or exterior use.
Refer to the Studco design and installation manual for Top Hat section span tables. Top Hat sections and cladding sections can be custom rolled to suit your project specific requirements.
Studco Access Panels
The Studco access panel range of Metal Face, Sound Rated and Fire Rated Access Panel Systems have been designed to meet the requirements of the Building Codes of Australia and New Zealand for both Domestic and Commercial installation.
The Studco Access Panels can be installed during or post construction and fit with security locks if required. Studco also offers acoustic panels, which are available with a range of different acoustic properties including RW30, RW45 and RW51. A range of finishes and custom sizes to suit all interior commercial, domestic and medical environments are available.
Budget Lock
Access panels available with a Budget Lock. Does not require any special tools to open.
Key Lock
Access panels available with a Key Lock for added security. A number of panels can be keyed alike.
Touch Latch
Access panels available with a Touch Latch, providing a clean finish. Simply press the door open.
M24R Resilient joiner bracket
Sound isolation brace that can be used in chase wall applications.
M239R Adjustable Furring Channel
Resilient mount
Fully adjustable furring channel clip that has sound isolation fixing
M326R Direct Fix hanger
High performance resilient ceiling hanger that meets the static deflection code.
Resilmount Sound Isolation Systems
Resilmounts sound isolation systems cover a wide range of effective solutions for isolating noise transfer for the wall and ceiling industry.
There are two types of noise transfer through walls and ceilings: airborne transfer, and structure borne transfer. Both types need to be considered to achieve the most effective result.
Studco Plasterboard Sections
The Studco Trim90 plasterboard beads are a superior plasterboard finishing section designed for installation by professional plasterboard contractors and to provide a clean defined edge on either curved or straight plasterboard details.
The perforated legs provide a strong key for building board finishing compounds and the optimum nib profile provides a knock resistant corner. The wide range of Trim 90 profiles available will suit all standard building boards, however as a custom profile is required Studco has the facility to produce special sizes and profiles to suit individual requirements. All standard exangle range of Trim90 beads are packaged in cartons to provide protection for your convenience.
EJ10 Expansion Joint
For use in areas where movement may occur, allowing for movement in all directions.
Supplied pre-assembled.
PEX90 Perforated External Angle
90ₒ the strong, optimum nib profile.
SM10 Aluminium Wall Track
All-in-one shadowline wall track that
guarantees consistent shadowline
margins and a neat finish in
corner mitres.
BT1013 Aluminium Bulkhead Trim
Curved to project specific radius
Suspended Ceiling
Exposed grid system supported by hanger wires attached directly to the existing structure.
Exposed T-bar wall angle
Studco Exposed T-Bar System
The Studco exposed grid ceiling system is a prefinished white T-bar system which is used to create grid modules which support lay in ceiling tiles, either plasterboard or acoustic mineral fibre types.
Exposed grid ceiling systems provide easy access to services within the ceiling. The Studco Exposed T Bar System can be suspended below Concrete Slabs, Joists or Purlins.
While a concrete supported structure doesn’t offer any specific challenges, there are factors that require consideration when supporting an exposed grid ceiling below purlins. The most common layout configuration is a 1200mm x 600mm module. This utilises Intermediate 1200mm Cross Runners spaced at 600mm centres between the Main Runners which run perpendicular to supporting purlins. The long edge of the ceiling tile then runs the same direction as the purlins.